• Large Setting Range
• High Switching Performance
• Small Size
• Simple To Mount
SD-011(NC): Thermostat (Normally Closed); Contact Breaker For Regulating Heaters. The Contact Opens When Temperature Is Rising.
SD-011(NO): Thermostat (Normally Open): Contact Maker For Regulating
Filter Fans And Heat Exchangers Or For Switching Signal Device When Temperature Limit Has Been Exceeded. The Contact Closes When Temperature Is Rising.
| Temperature Range |
0 to +60°C |
| Switch Temperature Difference |
0~+60°C |
| Sensor Element |
7K (+4K tolerance) |
| Contact Type |
Thermostatic Bimetal |
| Contact Resistance |
Snap-Action |
| Service Life |
<10m Ohm (Incidental Connection Line) |
| Max. Switching Capacky |
>100,000 Cycles |
| Connection |
250VAC,10(2)A,120VAC,15(2)A,30WDC at 24VDC to 72VDC |
| Casing |
2-Pole Terminal, Clamping Torque 0.5Nm Max.:Rigid Wire 2.5mm2,
Stranded Wire (With Wire End Ferrule) 1.5mm2 Plastic According To UL94 V-0, Light Grey |
| Mounting |
Clip For 35mm DIN Rial |
| Dimensions |
64x33x44mm |
| Weight |
41.5g |
| Fitting Position |
Variable |
| Operating/Storage Temperature |
-20~+80°C |
| Protection Type |
IP20 |
| Setting Range |
Art. No. Contact Breaker (NC) |
Art. No. Contact Maker (NO) |
Approvals |
| 0 to +60°C |
SD-011 |
SD-011 |
CE |
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.
